Find a wealth of information about home improvement projects by doing an internet search. The creators of this work have a good intention. You can usually tell exactly how to accomplish anything by looking at someone else really doing it on camera, whether it’s in an essay or a video.
You may think you can do it, too, after seeing this! However, if you do some of the things you see online, you might end up damaging your bathtub. It’s best to leave the refinishing of your bathtub to the experts. Why is this so?
1. Risks Associated with Chemical Exposure
The importance of having enough ventilation in the bathroom is well-known among bathtub refinishing professionals. Hazardous refinishing chemicals might offer a health concern during the reglazing procedure.
Inhalation of methylene chloride, a component of several stripping agents, may be fatal. It is possible to die from this chemical if you are exposed to at least 6 ounces of it. Methylene chloride has a pleasant odor and a clear liquid appearance. It is used by resurfacing professionals to remove old coatings from the tubs so that a fresh coat may adhere properly.
You should not use this chemical in your bathroom since it is an enclosed or tiny area with little or no aeration. When methylene chloride is spilled, brushed, or sprayed, the complex vapors will rapidly build up in tiny areas because the volatile organic chemical evaporates quickly.
Professional resurfacers are aware of the dangers of utilizing volatile substances, therefore they avoid products that contain them. When operating in a restroom, technicians use specialized equipment to make sure the air is well aerated.
2. Compromised Bath Safety
Low-quality bathtub reglazing might result in a slippery tub. To save money, you may choose to resurface your bathtub using low-quality goods in an effort to save money.
If you don’t get a thick, long-lasting coat, your tub will be extremely slippery, increasing the risk of an accident. Besides, surfaces like these tend to flake, chip, or crack easily after a short period. When you engage a skilled refinishing professional, you are far less likely to run into this issue.
3. Bubbles on the Surface
Properly refinished tubs are nearly difficult to distinguish from brand new bathtubs. However, not every project is a success. Not all tub refinishers are experts.
A common issue that arises from an incompetent refinisher’s work is the establishment of bubbles on the tub. The bubbles will appear when air gets trapped between the coating layers. This is because the coating may not be curing as expected. It may also occur when the incompetent refinisher resurfaced the tub without stripping the old coat on the tub.
As mentioned above, a competent refinisher knows that removing the old coat allows the new coat to stick properly. If not, it could result in bubbles on the tub’s surface.
To avoid this issue, ensure you reach out to a reglazing expert who can strip the old coat properly. Also, you’ll need to wait for at least one day before you can use the bathtub. This will allow the newly refinished coating to cure properly. During the 24 hours, ensure the tub doesn’t come into contact with water.
4. Rough Texture
A perfectly resurfaced tub should be smooth in texture. But, if your resurfaced tub feels rough in touch, it means that the refinishing was done without sanding or cleaning the tub’s surface.
The rough texture could also be a result of debris and dust that got trapped on the surface when it was curing. Besides, it is difficult to prevent dust from getting into your bathroom, so in some cases, dust may stick to the finish when it is curing.
Although it may seem a slight faultiness, it can make you feel uncomfortable when taking a bath, more so if the rough spots are in places that your skin comes in contact with when bathing. If you find it too uncomfortable, give a call to a bathtub resurfacing expert to smooth it out instantly.
5. Fading
Premature fading is another issue with low-quality resurfacing. This occurs when the ratio of materials used in the refinishing process is incorrect or the coating mixture is too thin. It can also occur when the refinisher uses abrasive cleaners.
You should choose a reputable refinishing firm that employs experts who understand how to correctly mix the right quantities of refinishing products.
6. Sticky or Tacky to the Touch
If your tub feels tacky or sticky, it is a sign that the coating has not cured as expected. This happens when the resurfacing materials are not properly mixed or when the coating reacts to a chemical or cleaning agent. Such issues are unlikely to arise when you hire a well-trained and experienced resurfacing professional.
